Current site: Peikko Vietnam. Do you want to change country or language?
Current site: Peikko Vietnam. Do you want to change country or language?
HPM® Rebar Anchor Bolts are utilized for anchoring concrete or steel structures and machinery into concrete base structures. This versatile anchor bolt range is well-suited for moderate loading conditions and has gained wide approval and adoption.
HPM® Rebar Anchor Bolts efficiently transfer tension, compression, and shear forces to the reinforced concrete base structure, such as foundations. These anchor bolts are compatible with HELKA® Column Shoes, HPKM® Column Shoes, SUMO® Wall Shoes, and can also be used for steel columns and machine fixings.
There are two types of anchors available: long anchors (type P), designed for splicing purposes, and short anchors (type L) with headed studs specifically intended for anchoring into foundations or in other applications where space is limited.
Long anchor bolts transmit compression and tension forces through the rib bond of ribbed bars, while short anchor bolts transfer these forces through a combination of headed studs and rib bond. PPL Anchor Bolt Installation Templates are provided to ensure the straightforward and accurate installation of anchor bolts in castings. The HPM® Rebar Anchor Bolt, as a steel component cast into concrete, is designed in compliance with Eurocodes or ACI 318M-11 standards.
Comprehensive product information like resistances, required supplementary reinforcement, concrete grades, limitations of use etc. can be found within the Technical Manual. Product details may be country-specific. For design, always use product information that is localized for design's destination country. Country specific Technical Manuals can be found under Documents page, or from website of the country in question.
HPM® Rebar Anchor Bolt - ETA, Installation Instructions, 03/2026
ETA (HPM® L): ETA-02/0006 (en, de)
Czech Republic (HPM® P): 204/C6/2019/070-055681
Finland (HPM® P, HPM® L HDG/ECO): BY 5B - EC 2 n:o 185 (fi, en)
Germany: Z-30.6-39
Hungary: A-744/2/2007
Hungary (HPM® P): A-5/2017
Netherlands: K65974/02
Poland (HPM® P): ITB-KOT-2021/1895
Romania: 001SC-01-324-2023
Slovakia (HPM® P): SK TP – 14/0099
Slovakia (HPM® P): SK04 – ZSV – 1987
Turkey: No. 802
Ukraine: UA.GS.2.34.001-22
U.K.: UKTA-0836-23/6938
The product has the country- or area-specific approvals mentioned above. Products under different approvals may differ from each other, for example, in the case of anchoring lengths.
Comprehensive product information like resistances, required supplementary reinforcement, concrete grades, limitations of use etc. can be found within the Technical Manual. Product details may be country-specific. For design, always use product information that is localized for design's destination country. Country specific Technical Manuals can be found under Documents page, or from website of the country in question.
Anchor bolts are often used in various applications, from dry indoor conditions to harsh industrial conditions where additional protection against steel corrosion is needed. Anchor bolts are available with alternative protective coatings. Standard coating options for anchor bolts are described below. If other type of protection against corrosion is needed, please contact your local Peikko sales office for more information.
DuraZinc
Peikko’s DuraZinc is an economical surface coating that allows anchor bolts to be galvanized either partially or completely. The coating consists of thermally sprayed zinc applied in accordance with EN ISO 2063, with a design thickness of 100 µm. The coating meets the requirements of corrosivity category C3 according to EN ISO 9223:2012.
Hot-Dip Galvanizing
Hot-dip galvanized anchor bolts are fully immersed in molten zinc in accordance with EN ISO 1461. The minimum coating thickness is 55 µm, meeting the requirements of corrosivity category C3 according to EN ISO 9223:2012.
Including a wide range of European design norms and several languages, Peikko Designer® has dedicated modules for:
The modern and intuitive user interface is based on interactive 3D graphics.
Peikko Toolbox includes Revit families and AutoCAD 2D blocks for many Peikko products. Peikko Toolbox supports Autodesk Revit, AutoCAD and AutoCAD LT versions 2016, 2017 and 2018. It includes product information and automatically notifies users of available updates.
Peikko offers free plugins to insert Peikko products and connections into your Tekla model. You can also create reports about Peikko products using the report template. Plugins include product information links and videos showing how products are used. It is also easy to check for plugin updates.
